Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX9400W - Asia - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin GTX9400W - Asia:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl GTX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
NORYL GTX™ 9400W resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA) that exhibits high heat resistance, high flow, and added mold release. NORYL GTX9400W resin is injection moldable and an excellent candidate for automotive under-the-hood applications such as power distribution boxes, relay boxes, connectors, sensors, and fuse box covers.

UL Yellow Card Link E207780-615350
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 97 g/10min ASTM D 1238
Temperatura 280 °C -
Carico 5 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Carico unitario a trazione 69 MPa ISO 527
Deformazione a rottura 39 % ISO 527
Modulo a flessione 2700 MPa ISO 178
Resist. urto Izod con intaglio, +23°C, 4mm 21 kJ/m² ISO 180/1A
ASTM Data
Modulo a trazione 1950 MPa ASTM D 638
Resistenza alla trazione di snervamento 64 MPa ASTM D 638
Resistenza alla trazione a rottura 62 MPa ASTM D 638
Allungamento a snervamento 11 % ASTM D 638
Allungamento a rottura 40 % ASTM D 638
Resistenza all'urto Izod con intaglio, 1/8 in 256 J/m ASTM D 256
Resistenza all'urto Izod con intaglio, basso temperatura 112 J/m ASTM D 256
Temperatura -30 °C -
Resistenza all'urto Izod, 1/8 in 849 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 78 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 187 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 203 °C ISO 306
Reaz. al fuoco spess.nom. 1.5mm HB class IEC 60695-11-10
Spessore provato 1.5 mm -
ASTM Data
DTUL a 66 psi 190 °C ASTM D 648
DTUL a 264 psi 83 °C ASTM D 648
Temp.di rammollimento Vicat 212 °C ASTM D 1525
Altre ProprietàValoreUnitáNorma del test
Densità 1100 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 95 - 105 °C -
Pre-essiccamento - Tempo 3 - 4 h -
Umidità del Processo ≤0.07 % -
Temperatura di fusione 270 - 295 °C -
Temperatura dello stampo 65 - 95 °C -
Zona 1 255 - 295 °C -
Zona 2 260 - 295 °C -
Zona 3 265 - 295 °C -
Velocità di Rotazione della Vite 20 - 100 rpm -
Contropressione 0.3 - 1.4 MPa -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Applicazioni
Automotive
Disponibilità geografica
Asia Oceano Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.